Review Porter Cable 12 Drill Press 8 Amp

Porter-Cable 15″ Floor 12-Speed Drill Printing Review – Model PCB660DP

By Todd Fratzel on Power Tools, Product Reviews

Porter-Cablevision fifteen″ Drill Press – Model PCB660DP

Several months ago Porter-Cablevision sent us one of their new drill presses, the Porter-Cable 15″ Flooring Drill Printing, Model PCB660DP. As I mentioned in an earlier mail last month we've been testing several unlike size drill presses in preparation for a drill press feature article. The Porter-Cable 15″ Floor model fits well in the mid-size range so nosotros were glad to give it a exam bulldoze.

Before we dive into the review I want to share some of the basic features, specifications and description from Porter-Cable.

The Nuts

Featuring first-class four" spindle travel and X-Y axial projecting laser guidelines, the new PCB660DP delivers extra drilling capacity and authentic pre-alignment for precision and operation that woodworkers need in the woodshop. In addition, a depth adjustment gauge enables precise drilling of repetitive-depth holes with a 5/8" chuck.

The PCB660DP includes a durable 13-15/64" by 13-15/64" cast iron tabular array that tilts 45° correct or left and rotates out of the way when the drill printing base (20-3/eight" by xi") functions equally a piece of work surface. A quick-belt tension release knob allows woodworkers to rapidly change between 12 operating speeds (300-three,100 RPM), and dual hubs provide left or right side handle locations for even greater ease of utilize and convenience.

An adaptable work light provides better illumination of work expanse is included and the rack and pinion tabular array elevating allows for quick and easy adjustment of the work table.

Features

• X-Y axial projecting light amplification by stimulated emission of radiation guides provide accurate pre-alignment of drilling location
• Twelve operating speeds (300-3100RPM) allows for drilling in metals or forest and sanding operations
• Dual left and right hubs allow for placement of crank handles on either side of drill caput
• Cast Iron work Table designed for wood or metal drilling, tilts up to 45 degrees for bevel drilling
• Spindle travel upwards to 4″ provides extra depth chapters
• Aligning depth gauge allows for accurate repetitive drilling
• Adjustable gooseneck piece of work calorie-free for better illumination of work area

Specifications

• Motor: 8.0 Amps
• Motor Command: On/Off Toggle
• Speeds: 12 (300; 390; 450; 560; 640; 700; 990; 1550; 1620; 1900; 2620; 3100 RPM)
• Table Size: 13-15/64 x 13-15/64 "
• Tabular array Tilt: L and R: 45 °
• Table Insert: No
• Column Diameter: 2-7/8 "
• Spindle Taper: MT2
• Chuck Taper: JT3
• Quill Bore: 1.85 "
• Quill Stroke: iv "
• Key Chuck Chapters: 5/8 "
• Chuck to Table Capacity: 24-3/4 "
• Chuck to Base of operations Capacity: 44-3/8 "
• Height: 64 "
• Width: 16 "
• Depth: 26 "
• Weight: 151.ten lbs

Porter-Cablevision PCB660DP Review

I've had this drill press set up up in my shop for several months at present so information technology's been used for a diverseness of drill tasks. This review covers the full general performance and functioning of the PCB660DP during some of our standard uses in the shop.

Drill Printing Size

This is a 15 inch drill press where the 15 inches refers to the swing (swing is divers as twice the distance from the center of the spindle to the front face of the column). Plainly the bigger the swing the bigger the work piece that tin can be drilled. In simpler terms it ways that you tin drill a hole a maximum of 7-1/2″ from the work piece edge with a 15″ drill press.

Weighing in at over 150 lbs this is certainly a drill press that wants and needs some dedicated floor space. I've seen and heard of people using mobile bases but I don't recommend that equally most all drill presses are VERY top heavy. You're much better off picking some dedicated space and setting it upward in one case and leaving it alone.

As  you can see in the photograph to a higher place the base is rather small. That won't matter much if you ballast it to the floor but I want to indicate out that moving it requires extreme circumspection.

Controls

The drill press operational controls are located on the front as yous can run into above. When you pace upward to the larger drill presses similar this one you typically have an electronic laser sight (the smaller bench-tops usually take bombardment operated ones). So the control panel has an on/off switch for the laser and a nice large toggle on/off switch for the drills motor.

The built-in work calorie-free has a standard on/off switch on the back of the lamp. It uses a standard incandescent light seedling which provides dainty light at the working surfaces.

Just to the left of the on/off controls is the variable depth control. The depth of drilling can be set for repetitive drilling and controlling the depth of pigsty. Below is a photo of the right side of the drill press showing the spindle handles.

I found all the controls easy to use and well designed.

Variable Speed Adjustments

The Porter-Cable PCB660DP tin be operated at 12 unlike speeds depending on the type of material and type of drill bit existence used. To adapt the speed users must arrange the belt/pulley combination under the top housing.

Adjusting the belts on the pulleys is easy to do. All that is required is loosening ii belt tension lock knobs, pushing or pulling the belt tension handle, and adjusting the belt. On the inside encompass of the housing is a detailed chart showing the required belt/pulley configuration for each of the 12 speeds. Changing the belts on the pulleys was easy to empathise and perform.

Laser Sight

The PCB660DP comes with an X-Y Axis laser sight built-in. Every bit yous tin can see higher up the laser provides red lines on the work piece for alignment. The laser works quite well but it does require adjustment EACH time the table is moved. Adjusting the laser is straight forward following the directions that are printed on the laser housing. I think it'southward a nice feature for repetitive drilling tasks.

Work Table

The work tabular array on the PCB660DP is a strange circular shape with T-Slots congenital-in for clamps and fences. The table is a nice heavy cast-iron with a machined surface. The table can be adjusted in several ways as I'll discuss beneath.

If I had one small complaint about the table information technology would exist the lack of a wood insert. Drill $.25 tin can exist VERY expensive and the thought of running an expensive Forstner Bit into the cast-atomic number 26 makes me ill!

The table tin can be adjusted up and downwardly using the rack and pinion support on the column. The table can also be rotated in the horizontal airplane by releasing the clench below. That feature tin can be pretty handy when using a argue if you want to plough it xc degrees without setting it upwards again.

The table tin also be tilted left and right up to 45 degrees.

Overall Impression

The Porter-Cable 15″ Drill Press (Model PCB660DP) is a very skillful value priced at just $299. This drill press offers some great features like laser sights, adjustable speed, tilting tabular array and built-in work light. The motor provides tranquility, consistent ability for drilling different materials and hole types. The chuck and spindle produced accurate, consistent holes in our tests drilling in metal and wood.

If y'all're in the market for a mid-sized flooring drill printing then I recommend you consider this one. The PCB660DP is currently available at Lowe's.

nortonoball1956.blogspot.com

Source: https://www.homeconstructionimprovement.com/porter-cable-15-floor-12-speed-drill-press-review-model-pcb660dp/

Share this post